From here on the days get longer, until late June at any rate.
Bike trail along Four Mile Run approaching the south end of National (Reagan) Airport. The snow and ice from last week has cleared nicely.
These days I ride in as the sun is just coming up and then home in the dark. Even if there is plenty of cold weather ahead, more light and less dark is good.
When the first diamond frame bicycles became popular in the 1890s they were often called "wheels" - the national cycling association was called the "League of American Wheelmen." We have moved from "wheels" to "bikes," but the bicycles have remained remarkably the same over more than 100 years - elegant in their efficiency and simplicity. And many of the issues that we think are new? They were around then too.
Monday, December 20, 2010
Sunday, December 19, 2010
Slow Bike as Fast as Fast Bike for Commuting (says MD)
This article in the UK's online Telegraph refers to a medical journal's study that demonstrates that commuting on a cheap steel bike is every bit as fast as commuting on an expensive carbon fiber (or fibre, since he's British) one. The author is a medical doctor, which apparently is considered enough to make up for the many methodological problems with his "study."
As is often the case, the comments are more entertaining than the article itself. Some completely miss the point and a few quibble that the author's "expensive bike" wasn't expensive enough to properly compare to the cheap steel bike.
The best comment includes this:
My impression is that the increase in the average speed when riding the lighter bike (and using messenger bag rather than panniers) may not even be two miles per hour - say, from 15 to 16 mph average (for the whole ride, including sitting at lights and various slowing down for this and that). But the enjoyment of riding a faster bike and being able to accelerate much faster if I want to is more than enough that I choose to ride carbon fiber whenever that bike fits with the weather.
The suggestion that the cyclist losing weight is simpler and cheaper than paying big bucks to buy a lighter bike is something one sees in print often enough, but it doesn't work for me. By the same logic, I can argue that a particular tool (say a wrench)is just as good as a more expensive one that applies more force if the purchaser went to gym and worked out more and was stronger. Besides, if most people could lose five pounds or ten that easily, presumably they would.
As is often the case, the comments are more entertaining than the article itself. Some completely miss the point and a few quibble that the author's "expensive bike" wasn't expensive enough to properly compare to the cheap steel bike.
The best comment includes this:
But the best bike is better, although the difference is marginal. Carbon fibre means the bike is lighter and stiffer and more efficient to ride at any given speed. I would suspect the doctor's heart rate and power output will be slightly higher on his steel bike compared to his carbon bike. If you are very fit and taking part in events at a reasonably accomplished level, spending more on a bike is worthwhile.I particularly found the article interested since the good doctor's equipment (two bikes being compared) is similar to mine - a steel bike around 30 pounds and a carbon fiber around 20 pounds. (One difference is that I spent about the same amount on each, where he spent very little on his steel bike that he bought used and also less than I spent on either on his expensive carbon "fibre" bike - he's more fiscally sensible than I am, I guess.) And the commuting distance, around 40-45 minutes in good weather - is also similar.
My impression is that the increase in the average speed when riding the lighter bike (and using messenger bag rather than panniers) may not even be two miles per hour - say, from 15 to 16 mph average (for the whole ride, including sitting at lights and various slowing down for this and that). But the enjoyment of riding a faster bike and being able to accelerate much faster if I want to is more than enough that I choose to ride carbon fiber whenever that bike fits with the weather.
The suggestion that the cyclist losing weight is simpler and cheaper than paying big bucks to buy a lighter bike is something one sees in print often enough, but it doesn't work for me. By the same logic, I can argue that a particular tool (say a wrench)is just as good as a more expensive one that applies more force if the purchaser went to gym and worked out more and was stronger. Besides, if most people could lose five pounds or ten that easily, presumably they would.
Saturday, December 18, 2010
New Google Tool and Cycling
A new tool for analyzing frequency of words in the texts that Google Books has digitized (and has in its publisher program, too, I assume) allows some analysis (or conjecture, anyway) about cycling history.
An easy example that demonstrates this is to look at the frequency of the word "wheelmen" in American English - the results are fairly dramatic. With "ordinary" bicycles after the Civil War, there is some mention, but it is only with the introduction of modern safety bicycles in the 1880s that the term is much used - reaching a peak in 1885. The falloff seems earlier than I would have expected. Hmmm.
The tool also allows closer examination of a narrower time range, such as 1875 to 1925.
Other languages are available, including Russian. What was the usage of велосипед (bicycle in Russian) for example?
An easy example that demonstrates this is to look at the frequency of the word "wheelmen" in American English - the results are fairly dramatic. With "ordinary" bicycles after the Civil War, there is some mention, but it is only with the introduction of modern safety bicycles in the 1880s that the term is much used - reaching a peak in 1885. The falloff seems earlier than I would have expected. Hmmm.
The tool also allows closer examination of a narrower time range, such as 1875 to 1925.
Other languages are available, including Russian. What was the usage of велосипед (bicycle in Russian) for example?
Friday, December 17, 2010
Commuting in the Snow
Snowed yesterday here in Washington DC during the day; took me about 75 minutes I would guess to get home in Arlington (about ten miles). I was riding my Traitor Ruben bike that is a steel road bike with disk brakes. Riding in the dark is slow, even with a headlight.
This morning I rode in, having reduced the tire pressure to around 60 psi and swapping in regular pedals instead of clipless, and it went pretty good although I guess it took me around an hour - so, ten miles per hour avg. Actually, not so bad.
Usually here the ground isn't frozen solid and I need to stay on the bike trails, which get to be a mess with snow, ice and ruts. Today the ground is frozen solid so I went across the field for fun - a little more pedal energy required but easy to steer in a straight line.
Much of the rest of the way I road on the streets, which are nicely cleared. I try to stay out of heavy traffic - only one angry beep from a motorist.
Someone in Shirlington runs a small snow plow down the bike trail along Arlington Mill Road as far as Walter Reed, clearing about four-tenths of a mile of bike trail. What a nice thing to do!
Return home addendum - the ride home started around sunset but was mostly in the dark. It was a good ride, although tiring. I managed to maintain a pretty good pace. The trails were clearer of snow than in the morning so I skipped riding on the streets - also, in the dark at night the local commuters have much less interest in sharing "their" roads and I don't want to get clonked.
Most of the people riding in the snow were using mountain bikes - while intuitively it would seem like a big mountain bike tire would give better traction in the snow, you are also pushing the big front tire through the snow, which on balance seems like more work. The 25 mm tires I am using have almost no tread; it's the lowered inflation pressure that gives traction (I think). Anyway, it isn't tread!
The worst part this time is that the road salt used ends up all over the bike if any riding is done on the roads (which I did) and the stuff is just annoying to get off, but clearly should come off since it can't do any of the parts or the finish any good (aside from looking bad).
This morning I rode in, having reduced the tire pressure to around 60 psi and swapping in regular pedals instead of clipless, and it went pretty good although I guess it took me around an hour - so, ten miles per hour avg. Actually, not so bad.
Usually here the ground isn't frozen solid and I need to stay on the bike trails, which get to be a mess with snow, ice and ruts. Today the ground is frozen solid so I went across the field for fun - a little more pedal energy required but easy to steer in a straight line.
Much of the rest of the way I road on the streets, which are nicely cleared. I try to stay out of heavy traffic - only one angry beep from a motorist.
Someone in Shirlington runs a small snow plow down the bike trail along Arlington Mill Road as far as Walter Reed, clearing about four-tenths of a mile of bike trail. What a nice thing to do!
Return home addendum - the ride home started around sunset but was mostly in the dark. It was a good ride, although tiring. I managed to maintain a pretty good pace. The trails were clearer of snow than in the morning so I skipped riding on the streets - also, in the dark at night the local commuters have much less interest in sharing "their" roads and I don't want to get clonked.
Most of the people riding in the snow were using mountain bikes - while intuitively it would seem like a big mountain bike tire would give better traction in the snow, you are also pushing the big front tire through the snow, which on balance seems like more work. The 25 mm tires I am using have almost no tread; it's the lowered inflation pressure that gives traction (I think). Anyway, it isn't tread!
The worst part this time is that the road salt used ends up all over the bike if any riding is done on the roads (which I did) and the stuff is just annoying to get off, but clearly should come off since it can't do any of the parts or the finish any good (aside from looking bad).
Thursday, December 16, 2010
The "Skate Cycle" for Winter (1896)
A small ad from the December 24 1896 issue of Cycling Life - directed at the cycle business and not end consumers, this company is hoping dealers will sell this innovative approach to getting around in the snow and ice.
I don't think this would work well on snow - the "skate" would sink down and scrape whatever was below. Perhaps more importantly the front wheel spinning must contribute something to keeping the bike upright. And what would the steering be like? Today I rode home after about two inches of snow fell in Washington, about eight miles of snow covered bike trails. It's tiring because of the need to stay balanced as the wheels encounter hardened snow. This looks like it would be much worse.
Sunday, December 12, 2010
Russian Blogger Explains Cycling in Paris
"Live Streets" blog entry about the cycling infrastructure in Paris (in Russian). Google's language tool does an acceptable job of providing a English translation.
Of course, it isn't perfect - a fair number of words related to cycling that the author uses don't appear in any dictionary so they are simply transliterated versions of the Russian Cyrillic ones. Most of these are understandable this way, however - the blog entry title is "Sketch of veloinfrastrukture Paris" - "veloinfrastruktura" would be "cycling infrastructure," a single word coined most likely recently in Russian. Or the word "sitibayki" - that is, "city bikes," a case (another case) where an English word/phrase has been incorporated into Russian wholesale.
This is a good, comprehensive overview of what Paris does to support cycling as an alternative means of transportation. Much of what is described is available in some (a few?) American cities, but I don't think any do all these things.
Of course, it isn't perfect - a fair number of words related to cycling that the author uses don't appear in any dictionary so they are simply transliterated versions of the Russian Cyrillic ones. Most of these are understandable this way, however - the blog entry title is "Sketch of veloinfrastrukture Paris" - "veloinfrastruktura" would be "cycling infrastructure," a single word coined most likely recently in Russian. Or the word "sitibayki" - that is, "city bikes," a case (another case) where an English word/phrase has been incorporated into Russian wholesale.
This is a good, comprehensive overview of what Paris does to support cycling as an alternative means of transportation. Much of what is described is available in some (a few?) American cities, but I don't think any do all these things.
Saturday, December 11, 2010
Bicycle Christmas Ad (1896)
An ad in the December 24 1896 issue of Cycling Life.
I don't understand what this ad is trying to show specifically. Yes, this woman is pleased to have received a bicycle as a gift, but why is it hanging from the ceiling? Is that what it is hanging from? It seems a little odd.
You can see clearly the mesh added to the chain guard and rear fender to keep skirts out of the chain and the rear wheel.
Because Cycling Life is a magazine for "the trade" rather than consumers, it didn't feature too many themed ads of this sort. Below an image of Santa riding a bike taken from a larger ad for E.C. Stearns & Co. of Syracuse.
Full page version of above ad from the December 24, 1896 issue of Cycling Life.
I don't understand what this ad is trying to show specifically. Yes, this woman is pleased to have received a bicycle as a gift, but why is it hanging from the ceiling? Is that what it is hanging from? It seems a little odd.
You can see clearly the mesh added to the chain guard and rear fender to keep skirts out of the chain and the rear wheel.
Because Cycling Life is a magazine for "the trade" rather than consumers, it didn't feature too many themed ads of this sort. Below an image of Santa riding a bike taken from a larger ad for E.C. Stearns & Co. of Syracuse.
Full page version of above ad from the December 24, 1896 issue of Cycling Life.
Subscribe to:
Posts (Atom)